OEM Meyer Home Plow Motor Cable Used on Meyer Home Plow Auto Angling Hydraulic Unit 13851 Alternate Part Numbers: 05026, 1-M05026, 1M05026

OEM Meyer Home Plow Motor Solenoid Ground Wire Used on Meyer Home Plow Auto Angling Hydraulic Unit 13851 Alternate Part Numbers: 05027, 1-M05027, 1M05027

OEM Meyer Wire Module Yellow C-Port To Plow Light Runs from the Headlight Module Yellow C-Port to the grille from the Nite Saber plow lights. Alternate Part Numbers: 07118, 1-M07118, 1M07118

OEM Meyer 17 Pin Harness Plug Kit, Truck and Plow Side Used on the MDII and Plus Mount Plows. This is the rectangle version, the later ones are round. This has the power and ground, the Nite Saber plugs and the 3 pump solenoid wires. Contains: Vehicle Side Harness #

OEM Meyer Nite Saber Light Module Kit with Replaceable Fuses This will work with the Nite Saber Lights. Kit contains: (2ea) #2 Diagram 07347 Modules, (2ea) #4 Diagram 07118 Harness C-Port (Yellow) to Plow Light, (2ea) #3 Diagram 07609 B-Port (Green), Hardware Bag and switch # 08701 NOTE: #21 Diagram

OEM Meyer Harness Dual Control E47 Harness plugs into the two Meyer toggle switches # 21918 and # 21919 This will only work with the toggle switches. For wiring, there is a blue wire to a key on fuse, white wire to the solenoid under the hood and the red,

Aftermarket Meyer 51″ Black Truck Side Disconnect Ground Cable The black disconnect end plugs into the pump pigtail and the other eyelet end is for the ground side of the battery. Used on Meyer E46, E47, E57, E57H, E60, E60H, E61H and V66 Pump Units. Alternate Part Numbers: 15672, M15672,

OEM Meyer Touch Pad Control Harness Square Plug Plugs into touch Pad Controller # 22154 NOTE: Will NOT work with the Round Black Plug If you are using this harness to connect to the New Pistol Grip Control # 22690DC you will need adapter # 22717 Alternate Part Numbers: 15764,

OEM Meyer Slik Stik Single Lever Round Plug Control Harness Plugs into the Slik Stik Single Lever Control # 22092 For wiring, there is a Blue wire to a key on fuse, White wire to the solenoid under the hood and the Red Green and Black wire to the back

OEM Meyer Adapter Harness, Converts Square to Round Connection on 22154 Controller Adapter to go from old 6 pin round Touchpad vehicle harness, to newer style white rectangular plug for newer style Touchpad controllers. Allows you to use a new Touchpad with the old 6 pin round plug harness. Alternate