OEM Meyer Nite Saber New Style Headlight Module with Replaceable Fuses The Yellow cover comes off and all fuses can be replaced if they burn out. If you have the Old style version modules # 07116 you will need the center harness # 07609 to change over. If you need
OEM Meyer 3″ Hydraulic Locking Pin This will work on most Meyer pumps. You can use this to replace the bottom bolt to hopefully prevent your pumps from being stolen. Alternate Part Numbers: 07695, 1-M07695, 1M07695, 07695C, 1-M07695C
Aftermarket Meyer Packing Nut 1-1/2″ Ram Cylinder Packing Nut for a 1-1/2 Meyer cylinder, comes with the wiper. Make sure that this is the size you need, because there are also 2 cylinders. Measure the width of the chrome section of your Cylinder/Ram Alternate Part Numbers: 07805, M07805, 1305310
Aftermarket Meyer Packing Nut 2″ Ram Cylinder Packing Nut for a 2 Meyer cylinder. This comes with the wiper. Make sure that this is the size you need, because there are also 1-1/2 cylinders. Measure the width of the chrome section of your Cylinder/Ram Alternate Part Numbers: 07806, M07806, 1305115
OEM Meyer Replacement Hinged Plug End Truck Side Cap with Snap Ring Replacement Truck Side End Cap on the # 22691 which uses the Snap Ring NOTE: This will NOT work on the Newer Harness # 22691S which has a thread on the plug end. Alternate Part Numbers: 08059, 1-M08059,
Aftermarket Meyer Cutting Edge Bolt Kit 1/2″ X 2″, Pack of 9 Bolts and Lock Nuts Used on multiple cutting edges and brands using a 1/2″ carriage bolt. Alternate Part Numbers: 08184, M08184, SNP7345, 1301060
Aftermarket Meyer Blade Bolt Package 5/8″ 12 Pieces Used on a multiple of cutting edges that take a 5/8-11 X 2-1/2″ Carriage Bolt. Alternate Part Numbers: 08318, M08318, 1301065
OEM Meyer Replacement Hinged Plug End Truck Side Cap Replaces Truck Side End Cap on the # 22691S NOTE: This will only work on the Newer Version, it will NOT work on the Older one with the snap ring # 08059 Alternate Part Numbers: 08423, 1-M08423, 1M08423
Aftermarket Meyer Pivot Pin with Grease Fitting 2 Each Used on all the ST series plows, the C series plows and the HM plows. Alternate Part Numbers: 08544, 08544C, M08554C, 1302031
OEM Meyer Hardware Bag Kit Night Saber Light Hardware Bag Kit Nite is for the Nite Saber 1 and 2. This came in the Meyer plow light #’s: 07223, 07234, 07550 and 07404. Alternate Part Numbers: 08701, 1-M08701, 1M08701
OEM Meyer Hardware Bag for Nite Sabe 1 and 2 Light Kit Used on Nite Saber 1 # 07550 and Nite Saber 2 # 07787 Lights Alternate Part Numbers: 08791, 1-M08791, 1M08791
OEM Meyer E60 Cylinder Update Kit This is the Inner Cylinder Update Kit for the E60 Pump Unit ONLY. Will NOT work in the E60H Pumps. The older pumps used a 1-1/4″ cylinder 15694, this upgrades to a 1-3/4″ giving more lifting power. See 08839 Parts and Install Alternate Part
Aftermarket Meyer Pivot Pins with Cotter Pins 2 Each These are Non-Greaseable Pins. Fits ST Series, C Series, and HM Series Plows. Alternate Part Numbers: 09119, M09119, 1302030